Compare Adtran ATLAS™ 800 (1200185L3) Multiplexer to Adtran TSU 120™ Multiplexer (1202129L2#GOV)

The Quad T1/PRI module combines with other ATLAS components to implement a variety of WAN access products, including a T1 Bandwidth Manager, an ISDN Access Switch, and a Digital Access Cross-Connect System (DACS). The module provides four network ports, each of which can be independently configured to operate in T1 (DS-1 or DSX-1) or Primary Rate ISDN (PRI) modes. ??The Quad T1/PRI module can perform T1 to PRI conversion, translating between the robbed-bit signaling presented in a channelized T1 circuit and the D-channel signaling of a PRI circuit. When using the Quad T1/PRI module, ATLAS operates in a DACS mode supporting DS0 time slot interchange and DS0 grooming while preserving robbed bit signaling. ATLAS can be fully populated with Quad T1/PRI modules to support a pure DACSing application of 34 T1 circuits. Configuration of the Quad T1/PRI module can be accomplished through a variety of mechanisms, including Telnet or VT 100 Emulation. SNMP management is supported for alarm an... Less

ADTRAN's TSU Multiplexer Series redefined the T1 multiplexer marketplace in 1994. Today, this equipment is some of the most reliable and respected for aggregating multiple voice only or voice and data services onto T1 or FT1 bandwidths. The intelligent TSU and TDU devices offer either one (1XX series) or six (6XX series) expansion slots, with up to four interfaces per slot. More than thirty plug-in and plug-on modules are available to support analog voice, Nx56/64 data, subrate data, disaster recovery, and other applications. The "e" series devices additionally include SNMP management via a SLIP or 10BaseT port, an enhanced terminal screen. Less