> printer serial rs232

Versatile: Battery operated, light weight, with available ranges from 2-20 in-oz to 150-1500 ft-lb, and seven units of measure, in-oz, in-lb, ft-lb, Nm, dNm, mKg or cmKg. The MULTITORQTM system can be used with sockets, extensions, universal joints, ratcheting drivers or any of these combined. PC statistical analysis output: Down load histogram, minimum & maximum reading, mean, sigma N, sigma, CP, Cpk, % error, number of readings under & over tolerance. Serial Port Interface with computer or printer: True RS-232 communications port for downloading to computer or serial printer. Also configurable to Mitutoyo statistical printer protocol. Smart sensor: "Plug-and-Play" build-in EEPROM memory chip that stores sensor indetification & calibration factors. Factory calibrated, a sensor retains its accuracy with all Multitorqtm meters, just plug in the desired sensor. Periodic re-calibration is necessary. Data acquisition: Store and recall up to 3500 readings. An internal memory backup battery retains setup and last memory data for up to ten years. ROTARY SOCKET TRANSDUCERS: Rotary Socket Transducers can be mated to Multitorq offering dynamic torque verification. These sturdy transducers measure torque bi-directionally and are especially suited for displaying the output torque of stall/clutch- type power tool ( no impact or pulse type tools ). Four models available suited for RPM's of 1000 or less. Accuracy = +/- 1 % bi-directionally from 10-100 % of full scale. VISUAL & AUDIO CUES: Analog bar graph at top of display provides a live indication of applied torque. An OVER warning flag comes on to indicate maximum sensor range has been exceeded. Green MIN LED indicated lower tolerance has been achieved and a RED MAX LED indicates upper tolerance has been exceeded. Audio alarm produces a distinctive 2KHz tone. Audio output jack provided for optional head phoned in a noisy environment.

The IOGEAR USB to 2-port serial RS-232 converter provides two RS-232 serial connectors via one single USB port. You can instantly enjoy connectivity with modem, PDA, POS, and other serial devices on your PC or Mac without the hassle of opening your ...

The IOGEAR USB to 2-port serial RS-232 converter provides two RS-232 serial connectors via one single USB port. You can instantly enjoy connectivity with modem, PDA, POS, and other serial devices on your PC or Mac without the hassle of opening your ...

RS232 ExpressCard/34 Express Card Serial Port Laptop PX2303 RS232 ExpressCard/34 Express Card Serial Port Laptop PX2303 We are an honest eBay Power Seller and always hope to serve our customers best. But accidents may happen sometimes. No matter what the issue is, please kindly contact us by email firstly. In order to make you completely satisfied, we will try our best to solve the problem for you without delay! However, if we fail to do so after our communication, your neutral or negative feed

Hypermegasat Auction Details One of each of the following items, both Brand New : DMS International RS232 (DB9) Straight Thru Serial Cable with Female/Female connecters, and DMS International RS232 (DB9)Null Modem Serial Cable with Female/Female connecters! Works for all types of FTA Receivers If you have one of each of these you can program any FTA Receiver ** Items may not be exactly as pictured. Shipping Information I take pride in FAST SHIPPING , most orders are shipped within 24 hours!! LO

div class=" mainContainer Computers Electronics Cameras DVDs Music Games Books Toys in titles descriptions Company Info |Checkout Info |Shipping Info |Return Policy |FAQ's By continuing with your purchase using the eBay Buy It Now button, you agree to the Buy Terms of Use at http://stores.ebay .com/Buys- Internet- Superstore/Terms. html . Buy requires immediate payment for this item with PayPal. Until you complete payment, another buyer may purchase this item. Motorola RS232 Serial Cable - DB-9 Fema

div class=" mainContainer Computers Electronics Cameras DVDs Music Games Books Toys in titles descriptions Company Info |Checkout Info |Shipping Info |Return Policy |FAQ's By continuing with your purchase using the eBay Buy It Now button, you agree to the Buy Terms of Use at http://stores.ebay .com/Buys- Internet- Superstore/Terms. html . Buy requires immediate payment for this item with PayPal. Until you complete payment, another buyer may purchase this item. Motorola Symbol RS-232 Serial Cable - S

Serial Communication Parameters Detachable 10cm USB cable RxD, TxD LEDs for monitoring port status & easy diagnostics COM Port Number can be changed to COM1 to COM4 to support HyperTerminal, or any other COM port number required Industry Standard FTDI chip set & drivers for maximum compatibility Supports Windows Vista, XP, 2003, 2000, ME, 98, Linux, MAC-OS8, 9,X Full RS-232 modem control signals RS-232 data signals: TxD, RxD, RTS, CTS, DSR, DTR, DCD, RI, GND Powered by USB port. No external power adapter required Attractive translucent plastic design Serial port speed of up to 230K bps Adds one RS-232 serial port by connecting to USB port Installed as standard Windows COM port FIFO: 128 byte transmit buffer 384 byte receive buffer Works with USB 1.1 & 2.0 host port One DB9 male connector One Mini-CD Driver Software The USB Serial Adapter is designed to make serial port expansion quick and simple. Connecting to a USB port on your computer or USB hub, the USB Serial Adapter instantly adds serial communication port to your system. By taking advantage of the USB bus, the USB Serial Adapter make it easier than ever to add serial port and serial device to your system with easy plug-and-play and hot plug feature. Adapting the new technology, the serial port expansion now takes the new bus with easy and convenient connectivity. Plugging the USB Serial Adapter to the USB port, the adapter automatically detected and installed. There are no IRQ & COM port conflicts, since the port doesn’t require any additional IRQ, DMA, memory as resources on the system. The RS-232 port function as native windows COM port, and it is compatible with Windows serial communication applications. Each port is individually configurable.

FIB1-SERIAL is a powerful fiber converter for RS-232, RS-485/422 2 and 4-wire serial interfaces. It provides full flexibility with DIP switch settings and supports SNMP management. Multi-mode, single-mode up to 120Km or single strand models are available.

Serial to ethernet converter / Adapter of Tysso is capable of linking serial (RS-232) devices to your computer network via Ethernet (LAN or WAN) for access control or remote control and monitoring purposes. eCOV-110 Serial-Ethernet Converters or Device Server are ideal for automatic low-level remote data collecting or Point-Of-Product applications without additional PC. No software development knowledge is required in order to setup the serial-ethernet communication if the VirtualCOM (Virtual Serial Port Driver) is shipped with your serial device. Ethernet is one of the most popular way of communication on the Internet, through it, we can connect up with PC’s, LAN and WAN. However nowadays, most devices run on the network are Personal Computers, which cannot fulfill the needs for low-level automatic control and remote data collection applications. TYSSO e-COV-110 serial-ethernet converter / adapter has overcome the problems mentioned above. It transforms serial (RS-232 to TCP/IP, UDP... or other way round) or automatic control’s I/O data into Ethernet data stream, which could easily transfer the information to the remote destination via the Internet. For some applications, the e-COV-110 can also act as a standard PC to configure and transfer data by HTTP, TCP/IP or UDP protocols. Implementing automatic control and remote data control into high bandwidth is one of the latest technologies. Tysso e-COV series easily bridges the RS-232 devices on the computer network with the following functions: 1. Converts serial data to TCP/IP data. 2. Converts the equipments’ serial (RS232) data into the TCP/IP packet and send out by the Ethernet Data Stream (e-COV hardware must be setup with the IP Add. and Com Port) 3. Converts TCP/IP package data into the serial data (Remote WinSock must be setup to use the e-COV hardware). In summary, the Tysso eCOV-110 Serial to Ethernet Converter / Adapter is ideal for the remote control applications, access control applications, and the factory automation applications. FEATURES - RS-232 to Ethernet Connectivity - Your control can be extended to wherever the network reaches - The best and lowest cost IP based solution - Offering the best network solution for your Product/Equipment /System - Making the Automation- Control and the Data-Collection no boundary at all - Support the TCP/IP/UDP/HTTP/D HCP/TELNET/ICMP/A RP - OEM / ODM are welcome SPECIFICATIONS Hardware - CPU: Winbond W78E65P - Memory: 32KB RAM, 64KB Flash - Ethernet Port: x 1 * Interface: 10/100 Mbps Auto sensing * Signal: ETX+, ETX-, ERX+, ERX- * Protection: Built-in 1.5KV Magnetic Isolation - Serial Port: x 1 * Signal RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND * Baud Rate: 300 ~ 38400 bps * Parity: None, Even, Odd * Data Bits: 7, 8 * Stop Bit: 1, 2 * Flow Control: RTS/CTS, XON/XOFF Software - Operation Mode: TCP Server, TCP Client, UDP - Protocols: ICMP, TCP, IP, UDP, DHCP, HTTP - Management: Web Console, Windows Utility, Command Mode - Software upgrade method: Serial port, Windows Utility Others - Temperature/Humid ity * Operating: 0~55 C(32~131 F), 5~95% RH * Storage: -20~85 C(-4~185 F), 5~95% RH - Power Requirements: 5V~9V DC@ 300mA

Seca 460 RS232 Interface for Connection to Printer or PC This printer adapter allows the seca scales equipped with RS232 signal output function to print out hard copies of the patient s weight with date and time. Connects to just about every label printer. No computer is needed! Also used as the adapter for providing RS232 signal directly to a computer. Features: Weight of 0.25 lbs. Cable length of 45" Power supply through the scale Dimensions - 2" W x 4 " H x 1" D Compatible with the following Seca Scales: 763 767 769 644 634 664 656 674 4600000004

Electronic baby scale with digital display and serial interface RS232 This contoured baby scale, with its large tray and three-button operation hold, tare, lbs / kg ensures convenience, precision, comfort and safety. An integrated damping system compensates for movement, and the PC-friendly RS 232 interface eliminates the need for manual input. Capacity 44 lbs / 20 kg Graduations 0.1 oz or 0.2 oz / 2 gm or 5 gm(changeable to 22 lbs) Product Dimensions (HxWxD) 6" x 21 1/2" x 11 3/4" Tray Dimensions 8" x 21 1/2" Carton Dimensions 1/4" x 25" x 8 1/2" Weight 15 lbs Power Supply 6 AA rechargeable batteries / A/C UL adapter/recharger Serial Interface RS 232 Warranty 1 yearProduct photo may not exactly match the product offered for sale. Please refer to the product description.