Search results for "flash trigger"

GT218-C Radio Slave / 8-Channel / AC110V For USA Canada _________________ _________________ _________________ ___ Item Description The sender fits on a camera's hot shoe and triggers a remote flash, a studio strobe or a flash power pack (up to 3000 W/S) to which the receiver is attached. The sender contains a tiny user-installable 12V alkaline photo battery and has a function of sleeping mode when in standby status, getting rid of on/off switch.It can trigger some 20,000 times continuously with o

YH881-B Radio Slave / 4-Channel / AC110V For USA Canada _________________ _________________ _________________ ___ Item Description The sender fits on a camera's hot shoe and triggers a remote flash, a studio strobe or a flash power pack (up to 3000 W/S) to which the receiver is attached. The sender contains a tiny user-installable 12V alkaline photo battery and has a function of sleeping mode when in standby status, getting rid of on/off switch.It can trigger some 20,000 times continuously with o

ITEM DESCRIPTION Optical Slave Trigger for Hot Shoe Flash / Wireless ( Not a hot shoe adapter ) There is a sync socket on the side of slave trigger. This is for you to trigger another flash by using a pc sync cord to connect this slave trigger with that flash. This slave trigger might not be compatible with Canon 430EX and 580EX. The problem is it fires the first time and then flash has to be turned off/on or the device removed and re-attached to get it to work again. Up for auction is a brand

This Hot Shoe Flash Remote Slave Trigger has a sensor to sense light from the master flash to trigger the slave flash wirelessly.

- This wireless remote set is particularly useful for portrait and product photography. You can move the flash to anywhere that produces the best lighting to the object you shoot with out any wire. You could freely move the flash in different angel and distance(30ft Max). The receiver receives radio signal transmitter when shutter is pressed. Wireless Flash Trigger and Receiver 4 channels Works with wireless flash trigger only Power Receiver: 2X AAA battery Max response time:1/1000 s triggerin

This wireless trigger is control discreteness for SONY Minolta camera to trigger hot shoe flash(example 580EX) or Studio strobe Flash light synchronously. It's a new version of CTR-301, which called CTR-301P. We designed it with a PC sync port according to the most of customers' request, we replaced the previous TEST bottom to the PC port. you can mount the flash directly on this receiver or hanging it down on the light stand where it can be connected via the PC sync port. It's very helpful for you.

Triggers any standard flash or multiple flashes with a built-in or attached slave. Active range approximately 30 feet. Mounts onto a standard camera shoe. Requires 2 "AA" Batteries (not included)

This slave with a 6.3mm monophone sync jack, and a female PC sync socket has been optimized to also work with digital cameras, as ordinary slave units do not work with most digital cameras that use a very rapid series of pre-flashes, that trigger the slave prematurely. It is Sensitive up to 100' (30.4 m) away. Working as an ordinary slave sensor, which will syncronize immediately with a master flash, the Speedotron DS-1 Digital Flash Trigger is also designed to work with digital cameras that use a pre-flash mode. This slave sensor switches from Normal Flash to Pre-Flash syncronization mode.

Digital Flash Triggers for Digital & Traditional Film Cameras. Digital Flash Triggers work as ordinary slave sensors, which will syncronize immediately with a master flash. This model includes a tiltable Bracket for Camera & Flash.

Seagull SYK-4 Optical Slave Trigger with PC Sync Socket, NEW Description Seagull SYK-4 optical slave trigger with built-in tripod socket is designed to work with portable flash units that have standard hot shoe mount. It can be triggered either by slave sensor or by using PC connector. It also can be mounted either on hot shoe or standard 1/4"- 20 thread tripod screw. This trigger can also be used as a PC to hot shoe adapter by mounting the trigger on a non-hot shoe camera. This optical slave s

ITEM DESCRIPTION Optical Slave Trigger for Hot Shoe Flash / Wireless ( Not a hot shoe adapter ) Optical Slave Trigger (This item is not a hot shoe adapter ) This slave trigger might not be compatible with Canon 430EX and 580EX. The problem is it fires the first time and then flash has to be turned off/on or the device removed and re-attached to get it to work again. Up for auction is a brand new JPSlave remote optical slave trigger for shoe mount flash, compact and sturdy with a standard hot s

@@ This slave with a hot-shoe contact for all portable flash units has been optimized to also work with digital cameras, as ordinary slave units do not work with most digital cameras that use a very rapid series of pre-flashes, that trigger the slave prematurely. It is Sensitive up to 100' (30.4 m) away. Working as an ordinary slave sensor, which will syncronize immediately with a master flash, the Speedotron DS-1 Digital Flash Trigger is also designed to work with digital cameras that use a pre-flash mode. This slave sensor switches from Normal Flash to Pre-Flash syncronization mode.

@@ The Bowens Transceiver Pulsar Radio Slave Trigger is a multifunctional device, which can be used to trigger flash units, film and digital cameras and light meters up to 100m. Because it uses radio transmission, rather than IR, it allows triggering around corners, through walls and is not affected by high ambient light situations.@@ Choose from four individual channel and six studio selectors, each providing a unique ID for a different flash device or combine them to trigger all equipment within a given setup or studio. Pulsar also features a hot-shoe mount, sync in and sync out terminals, a ready indicator, a test button and an external power option. @@ Because of its low-voltage operation, it is perfect for digital cameras. Each unit can be used as either a transmitter or receiver and is powered by just two AAA batteries. Whether you are triggering flash heads for complicated lighting setups or cameras for remote control nature shots or applying a special effect, this system is for you.@@ Each Pulsar unit can be either a transmitter or receiver and is capable of sending or receiving signals beyond 100m (333'). The Pulsar has four separate channels, enabling the photographer to isolate up to four light sources or to combine them and fire all of them at once without leaving the camera.@@ Additionally, the Pulsar has a studio selector switch, which provides isolation from other Pulsar units using the same channel, and allowing up to six different systems to operate independently in the same space or studio.

@@ The Trigger Grip is a medium format flash bracket with shutter release designed to make the job of any photographer easier. @@ With all mechanisms completely enclosed to eliminate wear and replacement, the Trigger Grip is a significant improvement over cable release systems. @@ Features include a swing arm that allows for flash height adjustability and a shutter release mechanically pressed by the trigger on the grip itself. @@ To eliminate the problem of twist, each model is camera specific with individualized base plates. @@ Designed to work with prism filters, equipment sits solidly upright, even with heavy flash attachments.

This Minolta camera uses a hot shoe adapter to accept the IR sender. Brand new IR transmitter,sits on a camera's hot shoe and emits a infrared beam which syncs with camera's shutter release and triggers any optical (light- sensitive) slave flash or any studio strobe with built-in slave. It will not work with any flash that works only with a relevant transmitter or it has a built-in receiver or switchable channels. This transmitter fits any camera with a regular hot shoe (center-point contact) o

@@ This multifunctional device can be used to trigger flash units, film and digital cameras and light meters for up to 100 meters. Because it uses radio transmission, rather than IR, it allows for triggering around corners, through walls and is not affected by high ambient light situations. @@ Choose from four individual channels and six studio selectors, each providing a unique ID for a different flash device or combine them to trigger all equipment within a given setup or studio. Pulsar also features a hot-shoe mount, sync in and sync out terminals, a ready indicator, a test button and an external power option. @@ Because of its low-voltage operation, it is perfect for digital cameras. Each unit can be used as either a transmitter or receiver and operates off of two AAA batteries. @@ Precision, Power and Digital Dependability, The Pulsar has four separate channels, enabling the photographer to isolate various light sources or to combine them and fire them all at once without leaving the camera. Additionally, the Pulsar has a studio selector switch, which provides isolation from other Pulsar units using the same channel, and allowing up to six different systems to operate independently in the same studio or shooting space. @@ It also has a five way channel selector switch that allows the photographer to select all flash heads to fire simultaneously or to fire up to four heads individually. @@ The Pulsar features radio instead of IR transmission, allowing it to trigger around corners and through walls. It is also unaffected by high ambient light orlow-light situations. The Pulsar's low-voltage operation takes the fear out of connecting an expensive digital camera to a high voltage studio lighting system. @@ Other features include a co-axial PC sync out connection that allows photographers to use their existing sync leads, a DC input socket that allows for long term installations, and a test button that will allow the Pulsar to be tested without shooting any pictures. @@ Each Pulsar is two units in one and can be switched to either Tx (transmitter) or Rx (receiver) mode. Once switched on, the indicator lamp on top of the unit will blink approximately every three seconds to show that the unit is working. This same LED will light to show when the unit is transmitting or receiving a signal. The LED also acts as a low battery warning and double blinks when the batteries need changing. @@ To physically attach the Pulsar, when it's being used in receiver mode, to a flash unit, a bungee cord and connector plate are included. Using the elastic cord, the plate can be attached to the light unit or stand. The hot shoe slides onto the connector plate and is locked into position, providing a simple, effective and safe design.

The flash remote controller is harnessing optical theory making the master flasher to control remotely the auxiliary one to flash synchronously without the need of connecting wires.

The SCA 3083 Digital offers a choice of three different slave modes. 1/ Slave Trigger Function for Creative Lighting This mode allows any Metz flash that uses the SCA3002, SCA3000, and SCA 300 system to be used externally in manual or automatic mode to add light to dark areas of a scene. The slave can be triggered by any light pulse. 2/ Slave Trigger Function with Pre-Flash Suppression For digital cameras without a flash connection (hot shoe or PC connection) which works with a monitor pre-flash. This prevents accidental firing of the flash until the camera is ready to take the picture. The SCA 3083 will communicate when to fire with the Metz flash from the built-in camera flash. 3/ Cordless TTL or Automatic Flash Control Slave Mode In this instance, no setting on the slave flash is needed. You just need a Metz controlling flash connected to the camera. The controlling flash will communicate to the slave flash or multiple slave units. The SCA 3083 digital slave adapter evaluates the signals from the controlling flash, then the slave flash will fire at the right moment with the precise light output. Requires the #5592 SCA3000C Cord to connect to 45 CL-1, CL-4, and 60 CT-4 Flashes